Unconventional Superconducting Diode Effects via Antisymmetry and Antisymmetry Breaking.

Symmetry breaking plays a pivotal role in unlocking intriguing properties and functionalities in material systems. For example, the breaking of spatial and temporal symmetries leads to a fascinating phenomenon: the superconducting diode effect. However, generating and precisely controlling the superconducting diode effect pose significant challenges. Here, we take a novel route with the deliberate manipulation of magnetic charge potentials to realize unconventional superconducting flux-quantum diode effects. We achieve this through suitably tailored nanoengineered arrays of nanobar magnets on top of a superconducting thin film. We demonstrate the vital roles of inversion antisymmetry and its breaking in evoking unconventional superconducting effects, namely a magnetically symmetric diode effect and an odd-parity magnetotransport effect. These effects are nonvolatilely controllable through in situ magnetization switching of the nanobar magnets. Our findings promote the use of antisymmetry (breaking) for initiating unconventional superconducting properties, paving the way for exciting prospects and innovative functionalities in superconducting electronics.

Superior gravimetric CO2 uptake of aqueous deep-eutectic solvent solutions.

A 30% (w/w) [ImCl][EDA]-based deep eutectic solvent (DES) in water has demonstrated superior gravimetric CO2 uptake with desirable kinetics, lower regeneration enthalpy, and lesser degradation than the industrially popular 30% monoethanolamine (MEA) solution.

Multifunctional Underwater Adhesive Film Enabled by a Single-Component Poly(ionic liquid).

Tremendous efforts have been devoted to exploiting synthetic wet adhesives for real-life applications. However, developing low-cost, robust, and multifunctional wet adhesive materials remains a considerable challenge. Herein, a wet adhesive composed of a single-component poly(ionic liquid) (PIL) that enables fast and robust underwater adhesion is reported. The PIL adhesive film possesses excellent stretchability and flexibility, enabling its anchoring on target substrates regardless of deformation and water scouring. Surface force measurements show the PIL can achieve a maximum adhesion of 56.7 mN·m-1 on diverse substrates (both hydrophilic and hydrophobic substrates) in aqueous media, within ∼30 s after being applied. The adhesion mechanisms of the PIL were revealed via the force measurements, and its robust wet adhesive capacity was ascribed to the synergy of different non-covalent interactions, such as of hydrogen bonding, cation-π, electrostatic, and van der Waals interactions. Surprisingly, this PIL adhesive film exhibited impressive underwater sound absorption capacity. The absorption coefficient of a 0.7 mm-thick PIL film to 4-30 kHz sound waves could be as high as 0.80-0.92. This work reports a multifunctional PIL wet adhesive that has promising applications in many areas and provides deep insights into interfacial interaction mechanisms underlying the wet adhesion capability of PILs.

Porous organic polycarbene nanotrap for efficient and selective gold stripping from electronic waste.

The role of N-heterocyclic carbene, a well-known reactive site, in chemical catalysis has long been studied. However, its unique binding and electron-donating properties have barely been explored in other research areas, such as metal capture. Herein, we report the design and preparation of a poly(ionic liquid)-derived porous organic polycarbene adsorbent with superior gold-capturing capability. With carbene sites in the porous network as the "nanotrap", it exhibits an ultrahigh gold recovery capacity of 2.09 g/g. In-depth exploration of a complex metal ion environment in an electronic waste-extraction solution indicates that the polycarbene adsorbent possesses a significant gold recovery efficiency of 99.8%. X-ray photoelectron spectroscopy along with nuclear magnetic resonance spectroscopy reveals that the high performance of the polycarbene adsorbent results from the formation of robust metal-carbene bonds plus the ability to reduce nearby gold ions into nanoparticles. Density functional theory calculations indicate that energetically favourable multinuclear Au binding enhances adsorption as clusters. Life cycle assessment and cost analysis indicate that the synthesis of polycarbene adsorbents has potential for application in industrial-scale productions. These results reveal the potential to apply carbene chemistry to materials science and highlight porous organic polycarbene as a promising new material for precious metal recovery.

Poly(ionic liquid) nanovesicles via polymerization induced self-assembly and their stabilization of Cu nanoparticles for tailored CO2 electroreduction.

Herein, we report a straightforward, scalable synthetic route towards poly(ionic liquid) (PIL) homopolymer nanovesicles (NVs) with a tunable particle size of 50 to 120 nm and a shell thickness of 15 to 60 nm via one-step free radical polymerization induced self-assembly. By increasing monomer concentration for polymerization, their nanoscopic morphology can evolve from hollow NVs to dense spheres, and finally to directional worms, in which a multilamellar packing of PIL chains occurred in all samples. The transformation mechanism of NVs' internal morphology is studied in detail by coarse-grained simulations, revealing a correlation between the PIL chain length and the shell thickness of NVs. To explore their potential applications, PIL NVs with varied shell thickness are in situ functionalized with ultra-small (1 âˆ¼ 3 nm in size) copper nanoparticles (CuNPs) and employed as electrocatalysts for CO2 electroreduction. The composite electrocatalysts exhibit a 2.5-fold enhancement in selectivity towards C1 products (e.g., CH4), compared to the pristine CuNPs. This enhancement is attributed to the strong electronic interactions between the CuNPs and the surface functionalities of PIL NVs. This study casts new aspects on using nanostructured PILs as new electrocatalyst supports in CO2 conversion to C1 products.

Roles of Anion-Cation Coupling Transport and Dehydration-Induced Ion-Membrane Interaction in Precise Separation of Ions by Nanofiltration Membranes.

Nanofiltration (NF) membranes are playing increasingly crucial roles in addressing emerging environmental challenges by precise separation, yet understanding of the selective transport mechanism is still limited. In this work, the underlying mechanisms governing precise selectivity of the polyamide NF membrane were elucidated using a series of monovalent cations with minor hydrated radius difference. The observed selectivity of a single cation was neither correlated with the hydrated radius nor hydration energy, which could not be explained by the widely accepted NF model or ion dehydration theory. Herein, we employed an Arrhenius approach combined with Monte Carlo simulation to unravel that the transmembrane process of the cation would be dominated by its pairing anion, if the anion has a greater transmembrane energy barrier, due to the constraint of anion-cation coupling transport. Molecular dynamics simulations further revealed that the distinct hydration structure was the primary origin of the energy barrier difference of cations. The cation having a larger incompressible structure after partial dehydration through subnanopores would induce a more significant ion-membrane interaction and consequently a higher energy barrier. Moreover, to validate our proposed mechanisms, a membrane grafting modification toward enlarging the energy barrier difference of dominant ions achieved a 3-fold enhancement in ion separation efficiency. Our work provides insights into the precise separation of ionic species by NF membranes.

Crystallizing Kagome Artificial Spin Ice.

Artificial spin ices are engineered arrays of dipolarly coupled nanobar magnets. They enable direct investigations of fascinating collective phenomena from their diverse microstates. However, experimental access to ground states in the geometrically frustrated systems has proven difficult, limiting studies and applications of novel properties and functionalities from the low energy states. Here, we introduce a convenient approach to control the competing diploar interactions between the neighboring nanomagnets, allowing us to tailor the vertex degeneracy of the ground states. We achieve this by tuning the length of selected nanobar magnets in the spin ice lattice. We demonstrate the effectiveness of our method by realizing multiple low energy microstates in a kagome artificial spin ice, particularly the hardly accessible long range ordered ground state-the spin crystal state. Our strategy can be directly applied to other artificial spin systems to achieve exotic phases and explore new emergent collective behaviors.

Self-Assembly of Miktoarm Star Polyelectrolytes in Solutions with Various Ionic Strengths.

We studied the self-assembly of miktoarm star polyelectrolytes with different numbers of arms in solutions with various ionic strengths using coarse-grained molecular dynamic simulations. Spherical micelles are obtained for star polyelectrolytes with fewer arms, whereas wormlike clusters are obtained for star polyelectrolytes with more arms at a low ionic strength environment, with hydrophilic arms showing a stretched conformation. The number of clusters shows an overall decreasing tendency with increasing the number of arms in star polyelectrolytes due to strong electrostatic coupling between polycations and polyanions. The formation of wormlike clusters follows an overall stepwise pathway with an intermittent association-dissociation process for star polyelectrolytes with weak electrostatic coupling. These computational results can provide relevant physical insights to understand the self-assembly mechanism of star polyelectrolytes in solvents with various ionic strengths and to design star polyelectrolytes with functional groups that can fine-tune self-assembled structures for specific applications.

Scalable Synthesis of Photoluminescent Single-Chain Nanoparticles by Electrostatic-Mediated Intramolecular Crosslinking.

We report the large-scale synthesis of photoluminescent single-chain nanoparticles (SCNPs) by electrostatic-mediated intramolecular crosslinking in a concentrated solution of 40 mg mL-1 by continuous addition of the free radical initiator. Poly(vinyl benzyl chloride) was charged by quaternization with vinyl-imidazolium for the intramolecular crosslinking by using 2,2-dimethoxy-2-phenylacetophenone (DMAP) as the radical initiator. Under the electrostatic repulsion thus interchain isolation, the intrachain crosslinking experiences the transition from coil through pearl-necklace to globular state. The SCNPs demonstrate strong photoluminescence in the visible range when the non-emissive units are confined thereby. Composition and microstructure of the SCNPs are tunable. The photoluminescent tadpole-like Janus SCNP can be used to selectively illuminate interfacial membranes while stabilizing the emulsions.

Coarse-grained simulations of ionic liquid materials: from monomeric ionic liquids to ionic liquid crystals and polymeric ionic liquids.

Ionic liquid (IL) materials are promising electrolytes with striking physicochemical properties for energy and environmental applications. Heterogeneous structures and transport quantities of monomeric and polymeric ILs are intrinsically intercorrelated and span multiple spatiotemporal scales, which is more feasible for coarse-grained (CG) simulations than atomistic modelling. Herein we constructed a novel CG model for ethyl-imidazolium tetrafluoroborate ILs with varied cation alkyl chains ranging from C2 to C20, and the interaction parameters were validated against representative static and dynamic properties that were obtained from atomistic reference simulations and experimental characterizations at relevant thermodynamic states. This CG model was extended to study thermotropic phase behaviors of monomeric ILs and to explore ion association structures and ion transport quantities in polymeric ILs with different architectures. A systematic analysis of structural and dynamical quantities identifies an evolution of liquid morphology from homogeneous to nanosegregated structures and then a smectic mesomorphism via a gradual lengthening of cation alkyl chains, and thereafter a distinct structural transition characterized by a monotonic decrease in orientational and translational order parameters in a sequential heating cascade. Backbone and pendant polymeric ILs exhibit evident anion association structures with cation monomers and polymer chains, and striking intra- and interchain coordinations between cation monomers owing to an intrinsic polymer architecture effect. Such a peculiar ion pairing association leads to a progressive increase in anion intrachain hopping probabilities, and a concomitant decrease in anion interchain hopping events with a gradual lengthening of polymeric ILs. The anion diffusivities in polymeric ILs are intrinsically correlated with ion pairing association lifetimes and ion structural relaxation times via a universal power law correlation D ∼ τ-1, irrespective of polymer architectures.

Superconducting diode effect via conformal-mapped nanoholes.

A superconducting diode is an electronic device that conducts supercurrent and exhibits zero resistance primarily for one direction of applied current. Such a dissipationless diode is a desirable unit for constructing electronic circuits with ultralow power consumption. However, realizing a superconducting diode is fundamentally and technologically challenging, as it usually requires a material structure without a centre of inversion, which is scarce among superconducting materials. Here, we demonstrate a superconducting diode achieved in a conventional superconducting film patterned with a conformal array of nanoscale holes, which breaks the spatial inversion symmetry. We showcase the superconducting diode effect through switchable and reversible rectification signals, which can be three orders of magnitude larger than that from a flux-quantum diode. The introduction of conformal potential landscapes for creating a superconducting diode is thereby proven as a convenient, tunable, yet vastly advantageous tool for superconducting electronics. This could be readily applicable to any superconducting materials, including cuprates and iron-based superconductors that have higher transition temperatures and are desirable in device applications.

Phase Transitions of Oppositely Charged Colloidal Particles Driven by Alternating Current Electric Field.

We study systems containing oppositely charged colloidal particles under applied alternating current electric fields (AC fields) using overdamped Langevin dynamics simulations in three dimensions. We obtain jammed bands perpendicular to the field direction under intermediate frequencies and lanes parallel with the field under low frequencies. These structures also depend upon the particle charges. The pathway for generating jammed bands follows a stepwise mechanism, and intermediate bands are observed during lane formation in some systems. We investigate the component of the pressure tensors in the direction parallel to the field and observe that the jammed to lane transition occurs at a critical value for this pressure. We also find that the stable steady states appear to satisfy the principle of maximum entropy production. Our results may help to improve the understand of the underlying mechanisms for these types of dynamic phase transitions and the subsequent cooperative assemblies of colloidal particles under such non-equilibrium conditions.

A Ruthenium(II) complex-based probe for colorimetric and luminescent detection and imaging of hydrogen sulfide in living cells and organisms.

The development of reliable bioanalytical probes for sensitive and specific detection of hydrogen sulfide (H2S) plays important role for better understanding the roles of this biomolecule in living cells and organisms. Taking advantages of unique photophysical properties of ruthenium(II) (Ru(II)) complex, this work presents the development of a responsive Ru(II) complex probe, Ru-PNBD, for colorimetric and luminescent analysis of H2S in living cells and organisms. In aqueous solution, Ru-PNBD is yellow color and non-luminescent because of the photoinduced electron transfer (PET) process from Ru(II) complex luminophore to NBD moiety. The H2S-triggered specific nucleophilic substitution reaction with Ru-PNBD cleaves the NBD moiety to form pink NBD-SH and highly luminescent Ru-PH. The color of the solution thus changes from yellow to pink for colorimetric analysis and the emission intensity is about 65-fold increased for luminescent analysis. Ru-PNBD has high sensitivity and selectivity for H2S detection, low cytotoxicity and good permeability to cell membrane, which allow the application of this probe for H2S imaging in living cells, Daphnia magna, and larval zebrafish. Collectively, this work provides a useful tool for H2S analysis and expands the scope of transition metal complex probes.

Effect of Aromaticity in Anion on the Cation-Anion Interactions and Ionic Mobility in Fluorine-Free Ionic Liquids.

Ionic liquids (ILs) composed of tetra(n-butyl)phosphonium [P4444]+ and tetra(n-butyl)ammonium [N4444]+ cations paired with 2-furoate [FuA]-, tetrahydo-2-furoate [HFuA]-, and thiophene-2-carboxylate [TpA]- anions are prepared to investigate the effects of electron delocalization in anion and the mutual interactions between cations and anions on their physical and electrochemical properties. The [P4444]+ cations-based ILs are found to be liquids, while the [N4444]+ cations-based ILs are semi-solids at room temperature. Thermogravimetric analysis revealed higher decomposition temperatures and differential scanning calorimetry analysis showed lower glass transition temperatures for phosphonium-based ILs than the ammonium-based counterparts. The ILs are arranged in the decreasing order of their ionic conductivities as [P4444][HFuA] (0.069 mS cm-1) > [P4444][FuA] (0.032 mS cm-1) > [P4444][TpA] (0.028 mS cm-1) at 20 °C. The oxidative limit of the ILs followed the sequence of [FuA]-> [TpA]-> [HFuA]-, as measured by linear sweep voltammetry. This order can be attributed to the electrons' delocalization in [FuA]- and in [TpA]- aromatic anions, which has enhanced the oxidative limit potentials and the overall electrochemical stabilities.

Reconfigurable Pinwheel Artificial-Spin-Ice and Superconductor Hybrid Device.

The ability to control the potential landscape in a medium of interacting particles could lead to intriguing collective behavior and innovative functionalities. Here, we utilize spatially reconfigurable magnetic potentials of a pinwheel artificial-spin-ice (ASI) structure to tailor the motion of superconducting vortices. The reconstituted chain structures of the magnetic charges in the pinwheel ASI and the strong interaction between magnetic charges and superconducting vortices allow significant modification of the transport properties of the underlying superconducting thin film, resulting in a reprogrammable resistance state that enables a reversible and switchable vortex Hall effect. Our results highlight an effective and simple method of using ASI as an in situ reconfigurable nanoscale energy landscape to design reprogrammable superconducting electronics, which could also be applied to the in situ control of properties and functionalities in other magnetic particle systems, such as magnetic skyrmions.

Luminescent Thermochromic Silver Iodides as Wavelength-Dependent Thermometers.

Luminescent thermochromic materials with a dramatic shift of emission band under different temperatures are highly desirable in temperature sensing fields. However, the design of the synthesis of such compounds remains a great challenge. In this work, two new luminescent thermochromic silver iodides, (emIm)Ag3I4 (1) and (emIm)Ag2I3 (2) (emIm = 1-ethyl-3-methyl imidazole), have been synthesized under solvothermal conditions. Compound 1 features a [Ag3I4]- anionic layer, while compound 2 possesses an infinite [Ag2I3]- chain structure, both of which are charge balanced by emIm+ cations. Particularly, they display luminescent thermochromism with a significant wavelength shift of emission maximum with temperature change. They represent rare examples of infinite layered or chain silver iodides that show luminescent thermochromism. Furthermore, the results indicate that compounds 1 and 2 are promising wavelength-dependent luminescent thermometers.

Effects of Nitridation and Vinylation of Imidazolium Rings on Hydrogen Bonding Interactions, π-π-Stacking Structures, and Dynamical Heterogeneities in Imidazolium and Triazolium Ionic Liquids.

Extensive atomistic simulations have been performed to investigate how nitridation and vinylation of cations affect hydrogen bonding structures and dynamics, π-π-stacking interactions between cation-ring planes, and translational and rotational dynamics of ion species in ionic liquids (ILs) consisting of bis(trifluoromethylsulfonyl)imide anions coupled with either imidazolium or triazolium cations. Both nitridation and vinylation of cations have remarkable effects on molecular electrostatic potential contours of cations and polarities of cation-ring hydrogen atoms, leading to distinct structures and dynamics in their hydrogen bonding associations with representative atoms in anions and in triazolium cations. Both imidazolium- and triazolium-ring planes exhibit varied π-π-stacking structures depending on nitridation positions on imidazolium rings. The vinyl-substituted cations have more prominent π-π-stacking interactions than their methyl-based counterparts because of the formation of π-conjugated ring vinyl moieties. Polar and apolar groups in ion species exhibit remarkable translational and rotational dynamics and distinct diffusion distributions in IL matrices at different timescales. The nitridation and vinylation of cations lead to enhanced deviation of translational mobilities of ion species from Gaussian behavior, and cations have a higher degree of dynamical heterogeneity than their coupled anions.

The ENUF method-Ewald summation based on nonuniform fast Fourier transform: Implementation, parallelization, and application.

Computer simulations of model systems are widely used to explore striking phenomena in promising applications spanning from physics, chemistry, biology, to materials science and engineering. The long range electrostatic interactions between charged particles constitute a prominent factor in determining structures and states of model systems. How to efficiently calculate electrostatic interactions in simulation systems subjected to partial or full periodic boundary conditions has been a grand challenging task. In the past decades, a large variety of computational schemes has been proposed, among which the Ewald summation method is the most reliable route to accurately deal with electrostatic interactions between charged particles in simulation systems. In addition, extensive efforts have been done to improve computational efficiencies of the Ewald summation based methods. Representative examples are approaches based on cutoffs, reaction fields, multi-poles, multi-grids, and particle-mesh schemes. We sketched an ENUF method, an abbreviation for the Ewald summation method based on the nonuniform fast Fourier transform technique, and have implemented this method in particle-based simulation packages to calculate electrostatic energies and forces at micro- and mesoscopic levels. Extensive computational studies of conformational properties of polyelectrolytes, dendrimer-membrane complexes, and ionic fluids demonstrated that the ENUF method and its derivatives conserve both energy and momentum to floating point accuracy, and exhibit a computational complexity of O N log N with optimal physical parameters. These ENUF based methods are attractive alternatives in molecular simulations where high accuracy and efficiency of simulation methods are needed to accelerate calculations of electrostatic interactions at extended spatiotemporal scales.

The coarse-grained models of poly(ethylene oxide) and poly(propylene oxide) homopolymers and poloxamers in big multipole water (BMW) and MARTINI frameworks.

Polyethylene oxide (PEO) and poly(propylene oxide) (PPO), especially their tri-block copolymers PEO-PPO-PEO (poloxamers), have a broad range of applications in biotechnology and medical science. Understanding their specific interactions with biomembranes is the key to unveil the unique features of poloxamers either as membrane-healing or membrane pore-forming agents. Based on the coarse-graining convention of the MARTINI force field and the big multipole water (BMW) model, which has a three charged site topology and can reproduce the correct dipole moment of four-water clusters, we generated coarse-grained (CG) models with analytical and numerical potentials for PEO and PPO homopolymers and poloxamers in dilute solution. The effective bonded interaction potentials between CG beads were determined from the probability distributions of bond lengths, angles and dihedrals that are determined from atomistic simulations. The nonbonded interaction parameters were fine-tuned to reproduce the conformational properties of atomistic PEO and PPO homopolymers and poloxamers via extensive CG simulations of PEO and PPO homopolymers and poloxamers in a BMW water environment. The reported CG models provide a promising framework for a comprehensive understanding of the microstructural, conformational, and dynamic properties of poloxamers and their delicate interactions with other species in an explicit water environment.